Guides

Find a Marketing Agency Decision-Maker's Email

How to find a marketing agency decision-maker's email: name the person, record the evidence, verify the address, check the rules, then send a small batch.

Short answer: Pick the job title you want to reach, find a named person with that title on the agency's own public pages, then look up or build the address and verify it before you send. Verification costs 1 credit per address on Outlevo [[1]](#sources), and the same on ZeroBounce [[2]](#sources).

Finding the right person is easy to get wrong. A guessed address can bounce, and an email to the wrong person costs you the one first impression you get.

This guide walks through the work in order: choose the title, find the name, record where you found it, get the address, verify it, check the sending rules and send a small batch. It also lists what the tools cost, quoted from each vendor's page with the date it was read.

Who this is for

This guide is for you if you sell something to marketing agencies and need to reach one named person at each. That might be a tool, a service, a white-label offer or a partnership. It assumes you can already describe the agencies you want, and it covers the step after that: turning an agency name into a person and a working address.

It is not a list-buying guide. You will not end up with 10,000 rows. You will end up with a short, checked list where each row has a name, a title, an address and a note on where each came from.

It is also not a guide to choosing which markets to sell into. That decision is yours. Outlevo asks which countries a customer sells into and never proposes markets [[3]](#sources), and this guide follows the same rule.

Two cases where this guide will not help much:

  • You need a phone number or a postal address. The steps here are about email only.
  • You want to identify anonymous visitors on your own site as people. Outlevo's website-visitor tool identifies the organization behind a visit and never a person [[4]](#sources), so it will not hand you a decision-maker's name.

Steps

1. Decide which titles count as the decision-maker

Before you search, write down the titles you will accept for your offer. The right title depends on what you sell. Write the list down: one or two primary titles and one fallback.

Your list tells you when to stop searching. If you find a named person with an accepted title, you are done with this step for that agency. If you find nobody, move on to the next agency and do not settle for "info@".

2. Find a named person on public pages

Start with the agency's own website. Look for a page that shows a name next to a title. If the site gives you a name but no title, or a title but no name, that is half a finding. Keep looking before you act on it.

Then look beyond the site. Any public page that shows the person's name and their role at that agency can serve as a second observation. The aim is two or more places that agree.

Be strict about what counts. A name in a three-year-old post may belong to someone who has left. A title on one page that contradicts another is a reason to hold off. When you can, prefer the more recent page.

Outlevo's free assessment reads your own public site, up to 5 public pages, and returns facts labelled as verified observations or AI inferences [[5]](#sources). It reads your own site, so for a prospect's site you do the reading yourself.

3. Write down the evidence, with a source and a date

For each person, keep a short note with three things: the claim ("Name, Title at Agency"), the page it came from, and the date you read it. This saves you later, when a reply says "I left that role last spring".

Outlevo's own rule is a useful model. A Readiness Card needs at least three observations, each with a source and a date [[6]](#sources). You do not need three for every person. But a note with a source and a date is far more useful than a name you cannot trace.

Two more habits from the same page are worth copying:

  • Keep a fact only when you can point to the words on the page. Outlevo keeps facts read from a website only when their quote is found on the page [[6]](#sources). Paste the exact words into your note.
  • Label guesses as guesses. Outlevo labels guesses as hypotheses and never presents them as findings [[6]](#sources). If you think someone is the managing director because of how the site is organized, write "hypothesis" next to it until a page says so.

4. Get the address

You have three ways to get an address for a named person. None of them is free of risk, and each one needs the verification step that follows.

Use a finder. A finder takes a name and a company domain and returns an address if it can. Prices and units differ by vendor:

  • ZeroBounce's Email Finder uses 20 credits per successful query [[7]](#sources), as read on its pricing page on 2026-11-16.
  • lemlist says it charges credits only for successful results on its email and phone finder, as of 2026-11-06 [[8]](#sources).
  • Causo counts a decision maker with a verified email as one token, and top-ups cost $0.30 a token on Founder's Delight and Serious Business, as of 2026-11-09 [[9]](#sources).
  • Outlevo's contact discovery costs 4 credits, and volume contact discovery costs 2 credits [[1]](#sources).

Those are the vendors' own descriptions. Compare what a "successful result" means on each before you buy credits.

Build a candidate yourself. If you know the person's name and the agency's domain, you can form a candidate address from them. Treat it as a hypothesis, in the same sense as above. A candidate is not a finding until verification returns a result.

Find it published. If the person has published their address on a public page, you can use it. Write down the page and the date in your note.

5. Verify before you send

Never send to an address you have not verified. The table below shows what each provider quotes.

ProviderPrice quotedDate read
OutlevoEmail verification costs 1 credit [[1]](#sources)n/a
ZeroBounceOne credit per email verified, in bulk or through the real-time API [[2]](#sources)2026-11-16
ZeroBouncePay as You Go starts at $39 for validating 2,000 addresses [[10]](#sources)2026-11-09
ZeroBounceFreemium plan at $0 a month with 100 validation credits monthly [[11]](#sources)2026-11-09
Kickbox1,000 verifications for $10 [[12]](#sources)2026-11-04
Bouncer1,000 credits for $8, a minimum pay-as-you-go purchase [[13]](#sources)2026-11-16

For a list of a few dozen agencies, the free tier or the smallest bundle is enough. ZeroBounce's validation covers catch-all emails and addresses behind secure email gateways [[14]](#sources).

The full comparison lives on Outlevo's email verification tools page. For one provider's plans in detail, see Bouncer pricing.

6. Work out the cost for your batch

Here is a worked example using Outlevo's published numbers. The Builder plan is USD 29 per month and includes 320 credits a month [[1]](#sources). If each contact takes one contact discovery (4 credits) and one email verification (1 credit) [[1]](#sources), that is 5 credits per contact. Spending the whole 320 credits on that alone would cover 64 contacts [[1]](#sources).

That is a ceiling, not a forecast. Some lookups return nothing, and you may spend credits on other work. Do the same sum with any provider's rates before you commit.

Set that against what you can expect back. Smartlead's State of Cold Email 2026 puts the median cold email reply rate at 0.74% per contact and the top quarter of senders at 1.43% (checked 2026-11-12) [[15]](#sources). At 0.74%, 100 contacts would average less than one reply [[15]](#sources). Plan the size of your batch and the time it takes with that in mind.

What to check

The person

  • Each name and title has a source and a date in your note, as Outlevo requires of each observation on a Readiness Card [[6]](#sources).
  • Where two pages disagree, you used the more recent one or held the contact back.
  • The title is on your accepted list from step 1.
  • Anything you inferred is labelled as a hypothesis in your note.

The address

  • It came from a finder, a public page or a candidate you built, and your note says which.
  • A verification run returned a result for it. If the result was "unknown" or risky, you have decided deliberately whether to send.
  • Generic role addresses are not a substitute for a named person. If you could only find "info@", treat that as a missing decision-maker.

The rules for emailing a company contact

The rules depend on where the recipient is and where you send from. Read the sources below and talk to a lawyer where the stakes justify it. This section is not legal advice.

  • UK business-to-business email. The UK ICO says you can email or text any corporate body, and lists a company, Scottish partnership, limited liability partnership or government body [[16]](#sources) (checked 2026-10-22). Read the ICO page for the exact scope before you assume a given agency is covered.
  • Legitimate interest. GDPR Recital 47 says: "The processing of personal data for direct marketing purposes may be regarded as carried out for a legitimate interest." [[17]](#sources) (checked 2026-10-22). That is one sentence from a recital. Read the full text and decide whether it fits your case.
  • US commercial email. The FTC's CAN-SPAM guide says: "Your message must include your valid physical postal address." [[18]](#sources) (checked 2026-10-22).
  • Google. Google's sender guidelines say: "Marketing messages and subscribed messages must support one-click unsubscribe, and include a clearly visible unsubscribe link in the message body." [[19]](#sources) (checked 2026-10-22).
  • Yahoo. Yahoo's sender best practices say: "Honor unsubscribes within 2 days" [[20]](#sources) (checked 2026-10-22).
  • The one-click standard. RFC 8058 says: "This document describes a method for signaling a one-click function for the List-Unsubscribe email header field." [[21]](#sources) (checked 2026-10-22).

Put the practical version in your template and your process. Include your postal address and a clear unsubscribe line. Keep a suppression list and apply it to every send, so someone who opted out once is never emailed again.

Your sending setup

If you send through Smartlead with Outlevo, every mailbox must be connected and warmed up before a campaign sends. Its domain must also have SPF, DKIM and DMARC checked in the last 7 days [[22]](#sources). Outlevo's managed mailboxes send nothing until a new mailbox is warm, which takes at least 14 days and usually about 3 weeks [[23]](#sources). If you run your own setup, hold it to the same standard. For background on why this matters, see the glossary entry on deliverability and the comparison of email deliverability tools.

Your own approval

Decide in advance who can be contacted, on which channels, how often and with what budget, and write it down. Outlevo works this way: nothing is sent outside a policy that a person approved, and policies set who can be contacted, on which channels, how often and with what budget [[24]](#sources). A short written policy of your own does the same job for a manual process.

Next step

Do this in order:

  1. Write your accepted title list.
  2. Pick 10 agencies and find one named person at each, with a source and date in your note.
  3. Get an address for each person, by finder, by public page or by building a candidate.
  4. Verify every address. Drop or hold back anything that does not come back clean.
  5. Check your template against the rules above: postal address, a clear unsubscribe line and a suppression list.
  6. Send the batch and log the outcome. Then decide whether to widen the list.

To describe the agencies you sell to before you start, Outlevo's free ICP assessment reads up to 5 public pages of your own website and returns facts labelled as verified observations or AI inferences [[5]](#sources). How Outlevo works explains the approval policy and the activity record. Pricing lists what each lookup costs in credits.

If you are comparing ways to get outbound done at all, see SDR software vs sales engagement platform vs outbound agency. For the same question in other industries, there are guides to finding a construction decision-maker's email and a manufacturing decision-maker's email.

Sources

  1. Outlevo pricing
  2. ZeroBounce: pricing
  3. ICP from evidence
  4. Website visitors integration
  5. Free ICP assessment
  6. Readiness Cards
  7. ZeroBounce: pricing
  8. lemlist pricing
  9. Causo pricing
  10. ZeroBounce: pricing
  11. ZeroBounce: pricing
  12. Kickbox: pricing
  13. Bouncer: pricing
  14. ZeroBounce: feature
  15. Smartlead, The State of Cold Email 2026: reply rate per contact (top quartile; January to June 2026, more than 850 million emails)
  16. ICO: Electronic mail marketing (PECR)
  17. GDPR Recital 47: legitimate interests of the controller
  18. FTC: CAN-SPAM Act compliance guide for business
  19. Google: Email sender guidelines
  20. Yahoo: Sender best practices
  21. RFC 8058: Signaling One-Click Functionality for List Email Headers
  22. Smartlead integration
  23. Managed mailboxes integration
  24. How Outlevo works

Related

See what Outlevo finds on your own website

Free, no sign-up, about a minute.