Short answer: Google's sender guidelines treat anyone sending more than 5,000 messages per day to Gmail accounts as a bulk sender, who must set up SPF and DKIM [[1]](#sources). Gmail and Yahoo also require DMARC from bulk senders [[2]](#sources). For per-account daily caps, check Google's current help pages.
Who this is for
This guide is for founders, sales operators and agency staff who send cold email from Gmail or Google Workspace mailboxes, or plan to. You may be sending your first campaign from a new mailbox. You may also be adding mailboxes to an existing setup and want to know where the rules start to apply.
It covers the bulk sender line Google documents [[1]](#sources), the authentication rules around it, what other mailbox providers ask for, and how to ramp a new mailbox. It does not quote Google's per-account daily sending caps, per-message recipient caps or the length of any temporary block. Check the current figures on Google's help pages before you plan volumes, and record the date you read them. Treat any third-party table of Gmail limits as a pointer, not a source.
A note on dates: the Google, Yahoo, Microsoft, RFC and FTC pages quoted below were checked on 2026-10-22 [[1]](#sources) [[2]](#sources) [[3]](#sources) [[4]](#sources) [[5]](#sources) [[6]](#sources) [[7]](#sources). The Smartlead benchmark was checked on 2026-11-12 [[8]](#sources). The MailReach price was read on 2026-11-16 [[9]](#sources).
The line Google draws at 5,000 messages a day
Google's help page on email sender guidelines puts the bulk threshold this way: "email senders who send more than 5,000 messages per day to Gmail accounts must meet the requirements in this section. Set up SPF and DKIM email authentication for your domain." [[1]](#sources)
Two points follow from that wording.
First, the figure is about messages sent to Gmail accounts in a day [[1]](#sources). It is a different measure from a per-mailbox cap. A cold email program that spreads its volume across many mailboxes can still add up to a large daily total. Count the total, not only what each mailbox sends.
Second, the sentence ends with the first requirement: authenticate your domain with SPF and DKIM [[1]](#sources). The same help page is where you check the other requirements Google attaches to bulk senders. Read that page yourself and write down the current wording. Do not rely on a summary, including this one.
Authentication: who needs what
The rule as it applies to Gmail and Yahoo is: SPF or DKIM for all senders, and SPF, DKIM and DMARC for bulk senders. [[2]](#sources)
Here is what applies to each record.
- SPF. The SPF standard says implementations "MUST limit the total number of those terms to 10 during SPF evaluation". [[7]](#sources) Keep your record within that limit.
- DKIM. Google's guidelines name it, with SPF, as the authentication a bulk sender must set up. [[1]](#sources)
- DMARC. Yahoo's guidance says to "Publish a valid DMARC policy with at least p=none". [[3]](#sources)
Other providers set a similar bar
If your list includes Outlook recipients, note Microsoft's announcement: "For domains sending over 5,000 emails per day, Outlook will soon require compliance with SPF, DKIM, DMARC." [[4]](#sources) The announcement says "soon", so check Microsoft's page for the current status before you rely on it.
Between them, the Google, Yahoo and Microsoft pages point the same way [[1]](#sources) [[3]](#sources) [[4]](#sources). Set up all three records on every sending domain from the first day, not once volume grows.
Unsubscribe and postal address
Two items sit outside the Gmail limits but belong in the same checklist.
One-click unsubscribe. RFC 8058 "describes a method for signaling a one-click function for the List-Unsubscribe email header field." [[5]](#sources) It is a header the sending side adds, so a recipient or their mail app can unsubscribe in one action. Confirm on Google's sender guidelines page whether the requirement covers your sending and which senders it applies to. Then confirm that your sending tool adds the header.
Postal address. The FTC's CAN-SPAM guide for business states: "Your message must include your valid physical postal address." [[6]](#sources) Put it in your signature or footer template, not in individual emails by hand.
How a new mailbox should ramp
There is no documented number here for how many cold emails a brand-new Gmail or Workspace mailbox can send per day while warming up. A number from a blog post would be a guess, and it would be about someone else's domain, list and content. For ramp schedules, read cold email daily limits per mailbox, then adjust to your own bounce and reply data.
What can be said is how Outlevo handles a new mailbox in its managed setup. A new mailbox sends nothing until it is warm: at least 14 days, usually about 3 weeks. [[10]](#sources) The mailbox's warm-up state and reputation are checked daily. [[10]](#sources) In that setup Outlevo buys separate sending domains, so your main domain is never touched. [[10]](#sources) The Self-Serve plan includes 2 domains and 4 mailboxes. [[10]](#sources)
If you connect your own mailboxes through Smartlead, Outlevo requires every mailbox to be connected and warmed up before a campaign sends. [[11]](#sources) It also requires the domain to have SPF, DKIM and DMARC checked in the last 7 days. [[11]](#sources)
If you warm mailboxes with a separate tool, MailReach lists warm-up at $19.50 per mailbox per month on its pricing calculator, billed monthly. [[9]](#sources) Compare options on the email deliverability tools page.
Whether to send cold email from your main domain or a separate one is a decision of its own. Read secondary vs primary domain for cold email before you point a campaign at the domain your team uses for everyday mail.
Steps
- Write down your total daily volume. Add up every mailbox, every tool and every domain that sends to Gmail recipients. Compare the total with the 5,000 line in Google's guidelines. [[1]](#sources) Do this before you add mailboxes, not after.
- Read Google's current limits. Open Google's email sender guidelines [[1]](#sources) and check its other help pages for per-account daily sending caps and recipient caps. Record any figures you find and the date you read them in your own runbook. Re-read them when a campaign behaves differently.
- Authenticate the sending domain. Publish SPF and DKIM for every sending domain, and DMARC with at least p=none. Gmail and Yahoo require DMARC from bulk senders. [[2]](#sources)
- Check your SPF record. Count the lookup terms. If you have added several sending tools to one domain, remove the ones you no longer use. Stay at or under the limit in the SPF standard. [[7]](#sources)
- Set up unsubscribe and the footer. Make sure your sending tool adds the List-Unsubscribe header in the one-click form. Add your physical postal address to the template.
- Start the new mailbox warm-up before the first campaign. Do not send cold email from it during warm-up. We suggest a lower and slower ramp than you would use for a mailbox with history. In Outlevo's managed setup, a new mailbox sends nothing for at least 14 days. [[10]](#sources)
- Ramp in small steps. Raise daily volume only after the previous level has produced clean bounce and reply data. Pause the increase if bounces or complaints rise.
- Verify addresses before sending. Compare options on the email verification tools page. Outlevo's email verification costs 1 credit. [[12]](#sources)
- Keep a stop rule. Decide in advance what bounce level or spam complaint level stops a campaign, and who can pause it. In Outlevo, kill switches pause a campaign, a channel or the whole workspace at once. [[13]](#sources)
What to check
Run through this list before each new campaign and again each month.
- Records. SPF, DKIM and DMARC resolve for every sending domain. Outlevo's Smartlead integration wants these checked within the last 7 days, which is a reasonable rhythm for any setup. [[11]](#sources)
- Volume. Your combined daily total to Gmail recipients is known and sits comfortably under the line you have chosen to stay below.
- Limits. The Google limit figures in your runbook carry a date from a recent read, not from memory.
- Headers and footer. One-click unsubscribe works when you test it. The postal address is in the template.
- Warm-up. Each new mailbox has finished warm-up. In Outlevo's managed setup, that means at least 14 days. [[10]](#sources)
- Placement and reputation. You have a way to see how mail lands beyond bounce counts. Inbox placement tests vs Postmaster vs your own data compares the options.
- Reply rate against a benchmark. Smartlead's State of Cold Email 2026 puts the median cold email reply rate at 0.74% per contact and the top quarter of senders at 1.43%. [[8]](#sources) A rate per contact counts a person who replies once as one reply, however many emails they were sent. If your rate is far below the median, look at list quality and targeting before you look at volume.
Next step
Read cold email daily limits per mailbox for ramp schedules, and the cold email deliverability guide for domains, warm-up and daily volume together.
If you have not yet decided who to email, start with targeting. The free ICP assessment reads up to 5 public pages of a website and returns facts labelled as verified observations or AI inferences. [[14]](#sources)
Sources
- Google: Email sender guidelines
- Google email sender guidelines
- Yahoo: Sender best practices
- Microsoft: Outlook requirements for high-volume senders
- RFC 8058: Signaling One-Click Functionality for List Email Headers
- FTC: CAN-SPAM Act compliance guide for business
- RFC 7208: Sender Policy Framework (SPF)
- Smartlead, The State of Cold Email 2026: reply rate per contact (top quartile; January to June 2026, more than 850 million emails)
- MailReach: pricing
- Managed mailboxes integration
- Smartlead integration
- Outlevo pricing
- How Outlevo works
- Free ICP assessment