Guides

Sending domains and mailboxes for your weekly volume

Work out how many mailboxes and sending domains you need for 200, 1,000 or 3,000 cold emails a week, with spare capacity and warm-up lead time.

Short answer: Divide your weekly volume by the limit you set per mailbox, then add spare mailboxes for any that are paused or resting. At an illustrative 100 emails per mailbox per week, a quarter of mailboxes held back and 3 mailboxes per domain, 1,000 emails a week needs 14 mailboxes on 5 domains. A new mailbox sends nothing until it is warm, which takes at least 14 days [[1]](#sources).

There is no single correct number. The right count depends on the per-mailbox limit you choose, how many mailboxes you keep in reserve and how many mailboxes you put on each domain. This guide gives you the arithmetic so you can change those three inputs and get your own answer.

Who this is for

This guide is for a founder, sales lead or operator who plans to send cold email from secondary domains and wants to size the setup before buying anything. You know roughly how many emails you want to send each week. You do not yet know how many domains and mailboxes that implies.

It is also for anyone who has been told to "just add more mailboxes" when replies are low. More mailboxes raise how much you can send. They do not make a poor list better, and they do not replace a reviewed policy on who you contact. A later section covers that.

One note on the numbers. The per-mailbox limit, the share of mailboxes to hold in reserve and the number of mailboxes per domain are all inputs you choose. This guide uses placeholder values to show the method. They are illustrative assumptions, not recommendations and not figures from any mailbox provider. For a deeper look at limits and ramp-up, see cold email daily limits per mailbox.

Steps

1. Write down the weekly volume you actually want

Count emails, not people. If a sequence has an opening email and two follow-ups, every one of those is a send. A plan to contact a list with three emails each is a plan to send three times as many emails as there are people on it, spread over the weeks the sequence runs.

Pick one number for a normal week. Size for that week, not for your busiest one.

2. Choose a conservative per-mailbox limit

Decide how many emails one mailbox will send in a week. Set it low, and ramp up only after you have reply and bounce data that supports it.

For the worked examples below, the placeholder is 100 emails per mailbox per week (20 a day across five sending days). This is an assumption made for illustration. If your own limit is lower, you need more mailboxes. If it is higher, fewer.

3. Divide to get active mailboxes

Active mailboxes = weekly volume ÷ per-mailbox weekly limit, rounded up.

At the placeholder limit, 200 emails a week needs 2 active mailboxes, 1,000 needs 10 and 3,000 needs 30.

4. Add room for paused or resting mailboxes

Some mailboxes will be off at any given time. A mailbox might be paused after a run of bounces, resting after a poor stretch, or still warming up. If you size for exactly the active count, one pause cuts your weekly volume.

Choose a share to hold in reserve. The placeholder here is 25%, which is also an assumption made for illustration. The formula:

Total mailboxes = active mailboxes ÷ (1 − reserve share), rounded up.

With a 25% reserve, the divisor is 0.75.

5. Choose how many mailboxes sit on each domain

Spread mailboxes over several secondary domains so that trouble on one domain does not stop everything. The placeholder is 3 mailboxes per domain, again an assumption for illustration. Your main domain stays out of cold sending entirely. For the reasoning, see secondary vs primary domain for cold email.

Domains = total mailboxes ÷ mailboxes per domain, rounded up.

6. Work through the three examples

All three examples use the same placeholders: 100 emails per mailbox per week, a 25% reserve and 3 mailboxes per domain. They are illustrations of the method, not targets.

Weekly volumeActive mailboxesWith 25% reserveDomains at 3 per domain
20023 (2 ÷ 0.75 = 2.67)1
1,0001014 (10 ÷ 0.75 = 13.3)5 (14 mailboxes across 5 domains)
3,0003040 (30 ÷ 0.75 = 40)14 (40 mailboxes across 14 domains)

200 emails a week. Two mailboxes cover the volume. A third gives you cover if one is paused. One domain holds all three. This is a small setup, and the main risk is having no spare, not having too little capacity.

1,000 emails a week. Ten mailboxes cover the volume, and the reserve takes it to 14. With 3 per domain you would use 5 domains, and the fifth domain would hold only 2 mailboxes. Five domains means you can pause one and still have most of your capacity.

3,000 emails a week. Thirty mailboxes cover the volume. The reserve takes it to 40, spread over 14 domains. At this size, the work shifts from buying mailboxes to watching them. Someone has to look at each mailbox's health, and an alert on bounces matters more than the count itself.

7. Add the lead time

Setup is not instant. A new mailbox sends nothing until it is warm. That takes at least 14 days and usually about 3 weeks [[1]](#sources). If you plan to start sending on a given date, order the domains and mailboxes at least three weeks before. When you add mailboxes later to raise volume, the same wait applies to them. For the warm-up process itself, see how to warm up a new domain for cold email.

8. Check the setup against your plan

If you use Outlevo's managed mailboxes, Outlevo buys the sending domains, creates the mailboxes through Zapmail, sets up DNS and warms them up, so you never touch your main domain [[1]](#sources). You choose the domains Outlevo proposes and the sender names [[1]](#sources). The Self-Serve plan includes 2 domains and 4 mailboxes [[1]](#sources). On the placeholder limit, 4 mailboxes with nothing in reserve is a 400-email week, so the 200-email example fits inside that allowance. The 1,000 and 3,000 examples are larger than what that plan includes. For counts above your plan, check the pricing page.

If you send through Smartlead, Smartlead sends from the mailboxes in your own Smartlead account, and Outlevo reads sent, reply, bounce and unsubscribe events back by webhook [[2]](#sources). Leads are pushed to Smartlead in batches of 100 [[2]](#sources). Sending, follow-ups and the mailboxes your plan includes use no credits [[2]](#sources). Details are on the Smartlead integration page.

What to check

Authentication and mailbox readiness

Before a Smartlead campaign sends through Outlevo, every mailbox must be connected and warmed up, and its domain must have SPF, DKIM and DMARC checked in the last 7 days [[2]](#sources). With many domains, that is a lot of records to keep current. Treat it as a weekly item on your list, not a one-time setup.

Mailbox providers set their own bars as well. Google says senders who send more than 5,000 messages per day to Gmail accounts must meet its requirements, and it asks for SPF and DKIM email authentication for your domain [[3]](#sources) (checked 2026-10-22). Microsoft wrote that "For domains sending over 5,000 emails per day, Outlook will soon require compliance with SPF, DKIM, DMARC." [[4]](#sources) (checked 2026-10-22). Those thresholds are counted per day, for each sender or domain. The 3,000-a-week example, spread over 14 domains, sends far fewer than 5,000 a day from any one domain, so volume alone would not reach them [[3]](#sources) [[4]](#sources). Authenticating every domain is still the right habit from the first send.

Health, daily

A reserve only helps if you know which mailboxes to rest. With Outlevo's managed mailboxes, each mailbox's warm-up state and reputation are checked daily [[1]](#sources). If you manage your own mailboxes, you need a routine that does the same. Pair it with your own reply and bounce numbers. See inbox placement tests vs Postmaster vs your own data for how those compare.

What the extra mailboxes cost

More mailboxes mean more to pay for, even when the sending itself is free. Take warm-up as an example. MailReach lists warmup at $19.50 per mailbox per month on its pricing calculator, and from $25 per inbox per month for 1–5 inboxes [[5]](#sources) [[6]](#sources) (checked 2026-11-16). At $19.50, the 14 mailboxes in the 1,000-email example come to $273 a month. The 40 mailboxes in the 3,000-email example come to $780 a month. Those totals are our arithmetic on a vendor's listed price, not a quote, and they leave out domains and the mailboxes themselves. If your plan already includes warm-up and mailboxes, as the managed setup does, this line item may not apply. See email deliverability tools: pricing compared.

Verification is the other recurring cost, and it scales with list size, not mailbox count. Bouncer lists $8 for 1,000 credits, $60 for 10,000 and $400 for 100,000 [[7]](#sources) [[8]](#sources) [[9]](#sources) (checked 2026-11-16). In Outlevo, email verification costs 1 credit per check [[10]](#sources). More on Bouncer's plans and on email verification tools compared.

Why more mailboxes do not fix a weak list

Adding mailboxes raises how much you can send. It does not change who you send to or what they do with it. Smartlead's State of Cold Email 2026, covering more than 850 million emails sent from January to June 2026, puts the median cold email reply rate at 0.74% per contact, the top quarter of senders at 1.43% and the top tenth at 2.63% [[11]](#sources) (checked 2026-11-12). The rate is per person contacted: a person who replies once counts once, however many emails they were sent [[11]](#sources).

Apply those rates to 1,000 contacts. At the median, that is about 7 replies. At the top-quarter rate, it is about 14 [[11]](#sources). More mailboxes change how many people you reach, not the rate at which they reply. Outlevo starts from the top-quarter rate, on the view that researched contacts, verified addresses and warmed mailboxes are what top-quartile senders do [[11]](#sources).

So before you size up, check the list. Is each contact someone who fits your ideal customer? Is each address verified? A 3,000-email week sent to a poor list needs 40 mailboxes and still produces poor results, and it puts those 40 mailboxes at risk.

A policy someone has reviewed

Capacity is not permission. In Outlevo, nothing is sent outside a policy that a person approved. Policies set who can be contacted, on which channels, how often and with what budget [[12]](#sources). Every external action is checked against the approved policy before it runs, and recorded in a ledger [[12]](#sources). Kill switches pause a campaign, a channel or the whole workspace at once [[12]](#sources). Whatever tool you use, write down the equivalent: who is in scope, how often they can be contacted, and who can stop the sending.

Check each of these for the places you send, and ask a lawyer if you are unsure. This is not legal advice.

  • Under CAN-SPAM, "Your message must include your valid physical postal address." [[13]](#sources) (checked 2026-10-22).
  • The UK regulator's PECR guidance says "You can email or text any corporate body (a company, Scottish partnership, limited liability partnership or government body)." [[14]](#sources) (checked 2026-10-22).
  • GDPR Recital 47 says "The processing of personal data for direct marketing purposes may be regarded as carried out for a legitimate interest." [[15]](#sources) (checked 2026-10-22). It says "may be", so it is not an automatic pass.

Which markets you sell into is your decision. Outlevo asks which countries you sell into and never proposes markets [[16]](#sources).

Next step

Do these three things in order.

  1. Write your weekly volume, counting follow-ups, and choose your own per-mailbox limit, reserve share and mailboxes per domain. Run the formula from the steps above.
  2. Order the domains and mailboxes at least three weeks before your intended start, because warm-up takes at least 14 days and usually about 3 weeks [[1]](#sources).
  3. Fix the list before you scale it. The free ICP assessment reads up to 5 public pages of your website and returns facts labeled as verified observations or AI inferences, plus up to 5 experimental segment hypotheses [[17]](#sources).

To see how Outlevo sets up domains and mailboxes for you, read the managed mailboxes page. To see how approvals and kill switches work, read How Outlevo works.

Sources

  1. Managed mailboxes integration
  2. Smartlead integration
  3. Google: Email sender guidelines
  4. Microsoft: Outlook requirements for high-volume senders
  5. MailReach: pricing
  6. MailReach: pricing
  7. Bouncer: pricing
  8. Bouncer: pricing
  9. Bouncer: pricing
  10. Outlevo pricing
  11. Smartlead, The State of Cold Email 2026: reply rate per contact (top quartile; January to June 2026, more than 850 million emails)
  12. How Outlevo works
  13. FTC: CAN-SPAM Act compliance guide for business
  14. ICO: Electronic mail marketing (PECR)
  15. GDPR Recital 47: legitimate interests of the controller
  16. ICP from evidence
  17. Free ICP assessment

Related

See what Outlevo finds on your own website

Free, no sign-up, about a minute.