Short answer: The FTC's CAN-SPAM guide says "Your message must include your valid physical postal address." [[1]](#sources) We have not checked California's anti-spam statute or the CCPA/CPRA, so a lawyer needs to read them for your case. Treat any summary of them, including this one, as a starting point.
Who this is for
This piece is for a founder, sales lead or operations owner who plans to send cold email to businesses and has at least one recipient in California. You may be asking one of three questions. Do I need consent first? What must the email contain? What happens if I get it wrong?
You do not need a legal background to follow it. You do need to be willing to book an hour with a lawyer at the end. A guide cannot replace someone who reads the current text for your situation.
What we can and cannot tell you
We have only checked a few primary texts, and we will not state anything we have not read.
Here is what we have read and checked:
- The FTC's compliance guide for CAN-SPAM, the federal law. [[1]](#sources)
- Google's email sender guidelines. [[2]](#sources)
- Yahoo's sender best practices. [[3]](#sources)
- For contrast, one UK regulator page and two pieces of EU text. [[4]](#sources) [[5]](#sources) [[6]](#sources)
We have not checked the following, so you will not find any of it stated as fact below. Ask a lawyer whether CAN-SPAM requires consent or only an opt-out for a B2B cold email. Ask how many business days you have to honor an opt-out under federal law, and what the maximum penalty per violating email is. Ask for the text of California Business and Professions Code section 17529.5, including what it prohibits and any damages figure. Ask who enforces California's statute and what penalties are on record. Ask how the CCPA/CPRA applies to a B2B cold email, including business thresholds and opt-out rights. Ask whether California treats B2B and B2C recipients differently. For the federal rules, the FTC guide is the place to start. [[1]](#sources)
Each of these is a question for a lawyer, or for the statute and regulator pages themselves. Do not rely on a blog post for them, ours included.
What the FTC says
The FTC publishes a compliance guide for businesses on the CAN-SPAM Act. Read the full guide at the FTC page. On the sender's identity, it is direct: "Your message must include your valid physical postal address." [[1]](#sources) That was checked on 2026-10-22.
Two practical points follow from that sentence.
First, the address belongs in the message itself. A postal address on your website's contact page does not meet the wording the FTC uses. Put it in the footer of every email in a sequence, including follow-ups.
Second, the word is "valid". Decide which address you will use before you launch, and make sure it is one where you can actually be reached. Whether a post office box or a registered agent's address counts is a question for your lawyer, because we have not read the FTC's position on it.
Read the full guide before you write your template. We are not summarizing the rest of it here, because we would be paraphrasing text we have not quoted.
What mailbox providers require
Providers set their own rules, separate from any statute.
Google's sender guidelines say: "Marketing messages and subscribed messages must support one-click unsubscribe, and include a clearly visible unsubscribe link in the message body." [[2]](#sources) That was checked on 2026-10-22. This is a mailbox-provider rule, not a statute.
Yahoo's sender best practices say: "Honor unsubscribes within 2 days". [[3]](#sources) Checked on 2026-10-22. This is also a provider standard and not a legal deadline. The legal deadline, if one applies to you, is something to confirm with counsel. A sensible internal rule is to meet the stricter of the two numbers you find.
Neither provider quote tells you what the law requires in California. They tell you what the inbox will tolerate. Treat them as a floor for your process, not as legal cover.
How B2B can differ by place
A common mistake is to assume one rule covers every recipient.
For contrast, the UK regulator says: "You can email or text any corporate body (a company, Scottish partnership, limited liability partnership or government body)." [[4]](#sources) That is UK PECR, not California law.
The EU's approach runs on a different basis. GDPR Article 6(1)(f) allows processing "necessary for the purposes of the legitimate interests pursued by the controller or by a third party". [[5]](#sources) Recital 47 adds: "The processing of personal data for direct marketing purposes may be regarded as carried out for a legitimate interest." [[6]](#sources) This is EU law and has no direct bearing on California. We cite it only to show how far the starting points can be from one another.
Do not carry any of these over to California by analogy. Whether California distinguishes B2B from B2C recipients is on the list of questions we have not checked. Ask it directly.
Steps
Here is a process you can run before your first California send. It does not replace legal advice. It makes sure you arrive at the lawyer's office with the facts in order.
1. Write down who you are emailing. List the recipient roles and the company types. Note whether any recipients are sole proprietors or use personal addresses at a business, and tell your lawyer.
2. Decide the sender identity. Pick the legal name that will appear, the person who will sign, and the valid postal address the FTC requires. [[1]](#sources) Use the same details in every email.
3. Build the footer once. Put the postal address and a clearly visible unsubscribe link in the body, where Google says the link must be. [[2]](#sources) Check that the link works from a Gmail inbox, not only from your sending tool's preview.
4. Set an opt-out clock. Pick an internal limit no looser than Yahoo's 2 days. [[3]](#sources) Confirm the legal limit with your lawyer and use the tighter of the two. Write the number into your runbook so the person on duty is not guessing.
5. Keep one suppression list. An opt-out on one campaign should apply to every campaign and every sender mailbox. If you import contacts from a CRM, bring the opt-out flags with them. Outlevo's optional HubSpot contact import includes the email opt-out field. It runs only after an admin turns contact import on with a stated purpose. [[7]](#sources)
6. Take the open questions to counsel. Bring the questions from "What we can and cannot tell you". Ask for answers in writing, with the statute section cited, so you can file them with your policy.
7. Test before you send. Send the template to a few mailboxes you control. Check the footer, the link and the unsubscribe path. Then send the first small batch and watch for unsubscribes and complaints before you scale.
If you want to plan the sequence itself, our note on how many follow-ups a cold email sequence needs covers cadence. Every follow-up carries the same footer and the same opt-out duty, so a longer sequence means more places to get it right.
What to check
Run this list before each campaign, not once a year.
- Address. Every email carries a valid physical postal address in the message. [[1]](#sources)
- Unsubscribe. A clearly visible link sits in the body, and one-click unsubscribe is supported. [[2]](#sources)
- Speed. Opt-outs are processed within your internal limit, which is no looser than 2 days. [[3]](#sources)
- Suppression. The opt-out reaches every campaign and mailbox, not just the one the person replied to.
- Sender identity. The From name and signature match the real sender, and the legal entity named in the footer is the one that sends.
- Contact source. You can say where each address came from and why you are emailing that person. Keep the answer in your records.
- Counsel's answers. The open questions are answered in writing: consent or opt-out, the legal deadline, the penalties, the effect of the California statute and the CCPA/CPRA on your emails, and any difference between B2B and B2C.
- Authentication. SPF, DKIM and DMARC are set up. Outlevo requires each sending domain to have them checked in the last 7 days before a campaign sends through Smartlead. [[8]](#sources) This is deliverability hygiene, not a legal duty we can cite.
If you are choosing a sending domain, our comparison of secondary and primary domains for cold email sets out the trade-offs.
How Outlevo supports the process
This section describes what Outlevo does, as stated on its own pages. It does not describe what the law requires.
Nothing is sent outside a policy that a person approved. Policies set who can be contacted, on which channels and how often. [[9]](#sources) Every external action is checked against the approved policy before it runs, and recorded in a ledger. [[9]](#sources) Kill switches pause a campaign, a channel or the whole workspace at once. [[9]](#sources) That gives you a place to write down your legal decisions once, so campaigns follow them, and a way to stop quickly if counsel tells you to.
Smartlead sends your campaigns from the mailboxes in your own Smartlead account. It reports sent, reply, bounce and unsubscribe events back to Outlevo by webhook. [[8]](#sources)
In Gmail, the Outlevo extension has a recipient guard that warns before you email a contact Outlevo should not reach. [[10]](#sources)
The public API includes resources named "suppressions" and "compliance". [[11]](#sources) Details are on the API reference. Read it there before you build on those resources, because this page does not describe what they do.
One more point, for teams that watch their own site traffic. Outlevo's website visitor tool identifies the company behind a network and never a person. It sets no cookie and sends nothing for browsers that send Do Not Track or Global Privacy Control. [[12]](#sources) That is a product behavior, not a statement about CCPA compliance. Ask your lawyer whether it matters for your use.
Next step
Do two things this week.
First, read the FTC's CAN-SPAM guide in full. Mark anything that conflicts with how you write emails today.
Second, book time with a lawyer who handles marketing and privacy law in California. Bring the open questions, your email template, and a description of who you plan to contact. Ask for the answers in writing.
If you want to work out who you should be emailing before the legal review, the free ICP assessment is a place to start. Outlevo asks which countries you sell into and never proposes markets. [[13]](#sources)
This is general information and not legal advice. Laws change, and your facts matter. Have a qualified lawyer check the California statutes, the CCPA/CPRA and the federal rules against your own campaigns before you send.
Sources
- FTC: CAN-SPAM Act compliance guide for business
- Google: Email sender guidelines
- Yahoo: Sender best practices
- ICO: Electronic mail marketing (PECR)
- GDPR Article 6(1)(f): lawfulness of processing
- GDPR Recital 47: legitimate interests of the controller
- HubSpot integration
- Smartlead integration
- How Outlevo works
- Gmail extension integration
- Outlevo API reference
- Website visitors integration
- ICP from evidence