Short answer: The question to check for a cold email to someone in Australia is what Australia's Spam Act requires, and rules from the US, UK or EU do not answer it. Read the Act and the regulator's guidance for consent, required content and opt-out timing before you send, and ask an Australian lawyer about your own case.
This page does not restate the Act's wording. A paraphrase of a statute can go stale or be wrong. What it covers instead is the list of questions to put to the Act, the rules from other countries that people often mix up with it, and how to set up your sending so that whatever you find in the Act is enforced in your own process.
Who this is for
This is for people who plan to send B2B cold email to recipients in Australia and have not yet read the Australian law themselves. That includes:
- Founders who run outbound without a sales operations or legal team.
- Sales operations leads who have a US checklist and want to know whether it carries over.
- Agencies that send on behalf of clients and need to know what to ask each client.
- Outlevo customers who must approve a sending policy before anything goes out.
It is for B2B senders and does not cover sending to consumers. The last of the questions below only helps you tell which side of the business/consumer line your recipients fall on.
Steps
1. Decide whether Australia is a market you sell into
That decision is yours. Outlevo asks which countries a customer sells into and never proposes markets [[1]](#sources). Nothing here is a reason to add Australia or to drop it. It is a reason to know what you are agreeing to if you do add it.
2. Get the Act and the regulator's guidance
Read two things yourself: the text of the Spam Act, and the guidance the regulator publishes for businesses that send commercial email. Take the current versions from the government's own sites, not from a summary on a vendor blog, including this one. Note the date you read them, because you will want to show later what you relied on.
3. Put seven questions to the Act
Write the answer to each question in your own words, and next to it the section or page it came from.
- Consent or opt-out. Does a B2B cold email need prior consent, or is an opt-out enough? Look for how the Act handles consent, including any provisions on inferred consent or conspicuous publication. Read how each is defined and what conditions come with it, and note which of your lead sources fit.
- Sender identity. What must the email say about who sent it?
- Contact details. What address or contact detail must the email carry, and for how long must it stay valid?
- Unsubscribe. What kind of unsubscribe facility must the email include, and how must it work?
- Opt-out timing. How many days do you have to stop sending after someone opts out?
- Enforcement. Which body enforces the Act, and which penalties has it actually imposed? Look for its published enforcement actions, not only the maximums in the statute.
- Business and consumer recipients. Where does the Act treat business and consumer recipients differently, so you know which side your recipients fall on?
If you cannot answer one of these from the text, that is the question to put to a lawyer.
4. Separate Australian rules from rules you already know
Most people arrive with a checklist from another country. Some of it will match the Australian rules. Some will not. Do not assume which. Here is what the other rules actually say, so you can tell them apart from what you find in the Australian text.
United States. The FTC's CAN-SPAM compliance guide says: "Your message must include your valid physical postal address." [[2]](#sources) (checked 22 October 2026). That is a US requirement. Whether the Australian Act asks for the same thing, or for something different, is the contact-details question above.
United Kingdom. The ICO's guidance on electronic mail marketing says: "You can email or text any corporate body (a company, Scottish partnership, limited liability partnership or government body)." [[3]](#sources) (checked 22 October 2026). It shows that a country's law can treat company recipients differently from individuals. It says nothing about Australia. The business and consumer question is where you find out whether and how Australia draws a similar line.
European Union. GDPR Article 6(1)(f) allows processing "necessary for the purposes of the legitimate interests pursued by the controller or by a third party" [[4]](#sources) (checked 22 October 2026). Recital 47 adds: "The processing of personal data for direct marketing purposes may be regarded as carried out for a legitimate interest." [[5]](#sources) (checked 22 October 2026). Those are provisions of the GDPR, which is EU data-protection law.
Mailbox providers. Google's sender guidelines say: "Marketing messages and subscribed messages must support one-click unsubscribe, and include a clearly visible unsubscribe link in the message body." [[6]](#sources) (checked 22 October 2026). Yahoo's sender best practices list "Honor unsubscribes within 2 days" [[7]](#sources) (checked 22 October 2026). These are conditions set by the providers, not statutes. They matter for whether your mail reaches an inbox. Meeting them tells you nothing about whether you meet the Australian Act, and the Act's opt-out period may be shorter or longer. The opt-out timing question settles that.
5. Turn your answers into a sending policy
Once you have written answers, put them where they will be applied every time, not in a memo no one opens. In Outlevo, nothing is sent outside a policy that a person approved, and policies set who can be contacted, on which channels, how often and with what budget [[8]](#sources). Every external action is checked against the approved policy before it runs, and recorded in a ledger [[8]](#sources).
That gives you a place to put your decisions: who is in scope, which channel, what volume. Outlevo does not decide the legal question for you. What goes into the policy is what you concluded when you put the questions to the Act.
6. Set up the sending side
Sending setup is a deliverability matter. It is separate from what the Act requires, which you answer when you put the questions to the Act.
- Before a campaign sends through Smartlead, every mailbox must be connected and warmed up, and its domain must have SPF, DKIM and DMARC checked in the last 7 days [[9]](#sources).
- If Outlevo sets up managed mailboxes, a new mailbox sends nothing until it is warm: at least 14 days, usually about 3 weeks [[10]](#sources). For how warm-up works in general, see How to warm up a new domain for cold email.
- If you are weighing a separate sending domain, see Secondary vs primary domain for cold email.
- Prices and plans for the main tools are compared on Email verification tools: pricing compared, and deliverability tools on Email deliverability tools: pricing compared.
7. Start small and watch the events
Send a small approved list first. Outlevo sends through Smartlead, which reports sent, reply, bounce, unsubscribe and category-change events back to Outlevo by webhook [[9]](#sources). Read the unsubscribes and replies yourself in the first days. If anything looks wrong, kill switches pause a campaign, a channel or the whole workspace at once [[8]](#sources).
8. Keep records
If a recipient or a regulator asks how you got an address, "we found it online" is not an answer. For each contact, keep:
- Where the address came from and the date you found it.
- Which version of your policy approved the send.
- When and how the person opted out, if they did.
Outlevo records every external action in its ledger [[8]](#sources), and its public API has "suppressions" and "compliance" resources among its 249 paths [[11]](#sources). Whether those records meet what the Australian Act expects is a question for the Act and your lawyer, not something to assume.
What to check
Run this list before the first Australian send, and again whenever you change a list source or a template.
The law
- You have read the Act and the regulator's current guidance yourself, and noted the date.
- Each of the seven questions has a written answer with the section it came from.
- You know whether your recipients are business or consumer addresses, and what the Act says about each.
- A lawyer in Australia has looked at anything you were unsure about.
The list
- You can say where each address came from. Does the Act's treatment of inferred consent and conspicuous publication cover that source? Check those provisions when you answer this.
- Addresses are verified before sending.
- Anyone who has opted out, from any earlier campaign or tool, is excluded. If you use HubSpot, contact import is optional and works only after an admin turns it on with a stated purpose; it brings email, name, job title and email opt-out [[12]](#sources).
The email
- It states who is sending, in the way the Act requires.
- It carries the contact detail the Act requires.
- It includes an unsubscribe route that works. Separately, marketing messages meet the Google and Yahoo provider conditions described earlier, which are mailbox rules and not part of the Act [[6]](#sources) [[7]](#sources).
The process
- You know the number of days you have to act on an opt-out, and your tools meet it. Outlevo reports unsubscribe events back from Smartlead [[9]](#sources), but how fast a given opt-out is processed against the Act's deadline is something to test in your own setup, not assume.
- One person owns the policy and approves changes.
- Manual sends are covered too. The Gmail extension includes a recipient guard that warns before you email a contact Outlevo should not reach [[13]](#sources). It drafts replies in Gmail's compose; it never sends from Gmail [[13]](#sources).
The evidence
- You can export or show the policy, the list source and the send history for any contact.
- You review a sample of sends against the answers in your memo each month.
Next step
Start with the second step today: find the Spam Act and the regulator's business guidance, and write down your answers to the seven questions with their sources.
If you want a clearer picture of who you would be emailing, the free ICP assessment reads up to 5 public pages of your website [[14]](#sources) and asks which countries you sell into [[15]](#sources). It returns facts labelled as verified observations or AI inferences, and up to 5 experimental segment hypotheses [[14]](#sources). Pricing and plans are on the pricing page.
This is general information, not legal advice. Laws change, and your facts matter. Check the Act and the regulator's guidance directly, and talk to a qualified lawyer in Australia before you send.
Sources
- ICP from evidence
- FTC: CAN-SPAM Act compliance guide for business
- ICO: Electronic mail marketing (PECR)
- GDPR Article 6(1)(f): lawfulness of processing
- GDPR Recital 47: legitimate interests of the controller
- Google: Email sender guidelines
- Yahoo: Sender best practices
- How Outlevo works
- Smartlead integration
- Managed mailboxes integration
- Outlevo API reference
- HubSpot integration
- Gmail extension integration
- Free ICP assessment
- Release 2026-10-19