Short answer: Cold email to a business address is not exempt from CAN-SPAM. The FTC's compliance guide says: "The law makes no exception for business-to-business email." A B2B cold email is covered the same way as a consumer one [[1]](#sources) (checked 2026-10-22).
Who this is for
This is for founders, sales leaders and operations people who send first-touch email to business contacts in the United States, or plan to. It is also for anyone who has inherited a list and a sending tool and wants to know what is settled before the next campaign goes out.
It is not a substitute for reading the regulator's own guide in full, and it is not a reading of the statute. It covers the one point the FTC puts beyond doubt, the separate rules mailbox providers apply, and the habits that make a campaign easy to defend if someone asks questions.
What the FTC says about B2B email
A common assumption is that anti-spam law protects consumers and leaves company-to-company email alone. The FTC's compliance guide for business rejects that assumption in one sentence: "The law makes no exception for business-to-business email." [[1]](#sources) The guide was read on 2026-10-22.
In practice this removes one tempting shortcut. You cannot reason that an address ends in a company domain, that the recipient is a buyer acting in a work role, and that the message is therefore outside the law. A B2B cold email is treated like a consumer one [[1]](#sources).
The FTC publishes the guide, and it is the document to work from. Read it in the original words instead of relying on a blog summary. It is at the FTC's CAN-SPAM compliance guide for business.
That is a deliberate limit. A summary that gets a detail wrong is worse than a link to the original.
The law and mailbox rules are separate
Passing a legal check does not mean your mail reaches an inbox. Mailbox providers set their own conditions for senders, and those conditions are not the statute. Three are worth knowing.
Google's sender guidelines say: "Marketing messages and subscribed messages must support one-click unsubscribe, and include a clearly visible unsubscribe link in the message body." [[2]](#sources) (checked 2026-10-22). That is a requirement on how the unsubscribe works and where it appears.
Yahoo's sender best practices say: "Honor unsubscribes within 2 days" [[3]](#sources) (checked 2026-10-22). Treat this as a provider expectation. It is not the statutory deadline, and this page does not state one.
Microsoft says: "For domains sending over 5,000 emails per day, Outlook will soon require compliance with SPF, DKIM, DMARC." [[4]](#sources) (checked 2026-10-22).
A campaign has to satisfy both sets of rules. Meeting the law does not make a provider accept your mail, and a provider's acceptance does not make a message lawful.
If some recipients are outside the United States
Everything above is about the US. Other places use different rules, and the US analysis does not carry over.
The UK regulator's guidance on electronic mail marketing says: "You can email or text any corporate body (a company, Scottish partnership, limited liability partnership or government body)." [[5]](#sources) (checked 2026-10-22). That is the ICO's guidance under PECR. It is a different regime from CAN-SPAM.
For EU recipients, GDPR Article 6(1)(f) allows processing where it is "necessary for the purposes of the legitimate interests pursued by the controller or by a third party" [[6]](#sources) (checked 2026-10-22).
The point of these two quotes is only that the rules change at the border. Outlevo asks each customer which countries they sell into and never proposes markets [[7]](#sources). Which markets you choose, and what each market's rules require of you, is your decision and one for your counsel.
Steps
These steps do not claim to be the law. They are a working method that follows from the points above. Where Outlevo is involved, each statement is limited to what Outlevo documents.
1. Read the FTC guide and write your own checklist
Open the FTC compliance guide and turn each requirement into a line on a checklist your team owns. Do this in your own words, with the date you read it. When the guide changes, the checklist changes with it.
2. Write down your sending rules before you build
Decide who may be contacted, on which channels, how often, and with what budget. Put it in a policy a named person approves.
Outlevo works this way. Nothing is sent outside a policy that a person approved, and policies set who can be contacted, on which channels, how often and with what budget [[8]](#sources). Whether you use Outlevo or not, the habit is worth copying: a rule that exists in writing before the campaign starts is easier to follow and to audit than one that lives in someone's head.
3. Make the unsubscribe work for the recipient and the provider
Two audiences judge your unsubscribe. The recipient needs a clear way out. The mailbox provider looks for the visible link and the one-click support that Google describes [[2]](#sources). Build for both, and test it from a real inbox before the first send.
Then decide who owns the clock on handling opt-outs. Yahoo's expectation is two days [[3]](#sources). Set an internal target no slower than that, confirm any legal deadline with your counsel, and write both on the checklist from step 1.
4. Authenticate the sending domain
Set up SPF, DKIM and DMARC on every domain you send from. Microsoft names all three [[4]](#sources).
If you send through Outlevo with Smartlead, the platform enforces a version of this. Before a campaign sends, every mailbox must be connected and warmed up, and its domain must have SPF, DKIM and DMARC checked in the last 7 days [[9]](#sources). Outlevo writes and schedules the emails, and Smartlead sends them from the mailboxes in your Smartlead account [[9]](#sources).
Two related pages cover the groundwork: how to warm up a new domain for cold email and secondary vs primary domain for cold email.
5. Carry every opt-out to every place that sends
An opt-out that lives in one tool and not in the others is how someone gets emailed after they asked to stop. Decide where the master list sits and make every system read from it.
Some points where Outlevo helps:
- Smartlead reports sent, reply, bounce, unsubscribe and category changes back to Outlevo by webhook [[9]](#sources).
- If you turn on contact import from HubSpot, Outlevo reads each contact's email opt-out. An admin has to turn the import on and state a purpose [[10]](#sources).
- The Gmail extension includes a recipient guard that warns before you email a contact Outlevo should not reach [[11]](#sources).
- The public API includes "suppressions" and "compliance" resources, for teams that manage these lists from their own code [[12]](#sources).
6. Keep a record of what was sent and why
If a recipient, a provider or a regulator asks what happened, you want an answer from a log, not from memory. Outlevo checks every external action against the approved policy before it runs, and records it in a ledger [[8]](#sources). If you use other tools, keep an equivalent record: the policy version, the send, the date and any opt-out that followed.
7. Know how to stop a campaign
Complaints and mistakes happen. Know in advance who can pause sending and how. In Outlevo, kill switches pause a campaign, a channel or the whole workspace at once [[8]](#sources). Whatever you use, test the stop before you need it.
8. Check the list before you send to it
Check addresses before you send to them. Email verification tools: pricing compared lists the options, and email deliverability tools: pricing compared covers monitoring and warm-up.
What to check
Run through this list before each new campaign. It also works as an agenda for a short review with whoever approves sending.
Law
- Your team has read the FTC's compliance guide, and the checklist from step 1 is dated.
- Nobody is relying on the idea that business addresses are outside the law. The FTC says there is no such exception [[1]](#sources).
- Your counsel has seen the campaign if you are unsure on any point. This page is not legal advice.
Mailbox providers
- The message has a visible unsubscribe link in the body and supports one-click unsubscribe [[2]](#sources).
- Your internal unsubscribe target is at least as fast as Yahoo's two days [[3]](#sources).
- SPF, DKIM and DMARC are in place on every sending domain [[4]](#sources).
Lists and recipients
- Every system that sends reads from the same opt-out list.
- You know which countries your recipients are in. If any are outside the US, you have checked the rules that apply there, not assumed the US ones [[5]](#sources) [[6]](#sources).
- Addresses have been verified before the first send.
Controls
- A named person approved the sending policy [[8]](#sources).
- You can pause a campaign, a channel or the whole workspace [[8]](#sources).
- A record of each send exists and you can find it.
For more on reading your results after launch, see inbox placement tests vs Postmaster vs your own data.
Next step
First, read the FTC's compliance guide for business and write the checklist. It is the FTC's own text.
Second, if you are still working out whom to write to, the free ICP assessment reads up to 5 public pages of your website and returns facts labelled as verified observations or AI inferences, plus up to 5 experimental segment hypotheses [[13]](#sources). It asks which countries you sell into and does not choose them for you [[14]](#sources).
Third, if you send to a specialized audience, a playbook on one segment may help with the practical side, such as cold email to law firms.
This article is general information, not legal advice. Laws change and facts differ between senders. Ask a qualified lawyer about your own campaigns before you send.
Sources
- FTC: CAN-SPAM Act compliance guide for business
- Google: Email sender guidelines
- Yahoo: Sender best practices
- Microsoft: Outlook requirements for high-volume senders
- ICO: Electronic mail marketing (PECR)
- GDPR Article 6(1)(f): lawfulness of processing
- ICP from evidence
- How Outlevo works
- Smartlead integration
- HubSpot integration
- Gmail extension integration
- Outlevo API reference
- Free ICP assessment
- Release 2026-10-19