Short answer: Name the person and their role from a page you can cite, then find the address with a finder and check it with a verifier. Outlevo's contact discovery costs 4 credits and email verification 1 credit [[1]](#sources). Before you send, include a valid physical postal address [[2]](#sources).
This guide covers one job: getting from a law firm's name to a checked email address for the person who can say yes. It does not tell you which role that is. The right role depends on what you sell and on how the firm is run. Confirm it from the firm's own pages, not from a rule of thumb.
Who this is for
This guide is for people who sell to law firms and want to reach one named person instead of a general inbox. That might be a founder doing outreach alone, a rep building a short list by hand, or an operator who wants a repeatable routine before turning on a tool.
It also suits you if you have been offered a list and want to know what you would be buying. A list is a set of claims about people. Each claim needs a source and a date before you act on it.
It is less useful if you already hold a verified contact at the firm. In that case, go straight to the rules for emailing below. If the contact came from a CRM, check the opt-out first.
For the wider approach to this market, see Cold email to law firms.
Steps
The routine has seven steps. Start with the first: write down the role you are looking for before you search.
1. Decide which role you are looking for
Write the role down before you open a browser. Think about who in a firm would approve the thing you sell, who would use it, and who would only be told about it. Pick one role per firm for the first message.
Do not assume the answer. If you are not sure who decides, treat that as an open question and label it as one. Outlevo's records follow the same rule: guesses are labelled as hypotheses, never presented as findings [[3]](#sources). A note that says "probably the person who runs the firm, unconfirmed" is honest. A note that just says "decision-maker" is not.
2. Define the firms you are looking at
A decision-maker search works best on a list of firms you already believe fit. Searching blind wastes effort on firms that were never going to buy.
If you have not written down who you sell to, start there. The free assessment on outlevo.com reads up to 5 public pages of a website and returns facts labelled as verified observations or AI inferences, along with up to 5 experimental segment hypotheses [[4]](#sources). It asks which countries you sell into [[5]](#sources). Outlevo never proposes markets [[6]](#sources), so that choice stays with you. You can run it at the free ICP assessment.
If you have past deals, they are a stronger starting point than a guess. Outlevo can import past deals from a CSV or your CRM and return a win/loss analysis that proposes ICP hypotheses [[7]](#sources). That analysis counts companies, not deals, and under 10 won companies is labelled very low confidence [[6]](#sources). If your sample is that small, treat the result as a prompt for questions.
3. Check what you already have
Before you look for a new address, look in your own records. Your CRM may already hold the contact, a past reply, or an opt-out.
The HubSpot integration can read contacts (name, email, job title and email opt-out) once an admin turns on contact import and states a purpose [[8]](#sources). That import is optional. If you do not use it, search your CRM by hand for the firm's domain.
If your list lives in a spreadsheet, a CSV import accepts up to 200,000 rows [[9]](#sources). You will rarely need that many for a law firm list. The point is to have one place where each firm, person and source sits side by side.
An existing opt-out beats any new find. If a person asked to stop, a freshly discovered address does not change that. The guide on opt-outs and suppression lists covers how to keep that list.
4. Find the person's name and role on a page you can cite
Open the firm's own website first and look for pages that name people and their roles. Record the exact words the page uses for the title, and the page address.
Use the page's wording, not yours. If the page calls someone by a title you did not expect, write that title down. Do not translate it into a role you assumed in step 1.
Keep the rule Outlevo applies to its own records: facts read from a website are kept only when their quote is found on the page [[3]](#sources). Paste the line you relied on. If you cannot find a line to paste, you have a guess, not a fact. Label it as one.
Add the date you looked. People change roles, and a note without a date cannot be judged later.
5. Confirm the role from a second place
One page is one observation. Look for a second, independent place that names the same person in the same role, and note it the same way.
Outlevo's Readiness Card needs at least three observations, each with a source and a date [[3]](#sources). You do not have to use Outlevo to borrow the rule. A three-line note per person is a workable standard: the claim, where you read it, and when.
If the sources disagree, do not pick the one you like. Record both and treat the role as unconfirmed. You can still email, but write the message so that it is not wrong if the role has changed.
6. Get the address
You have three options: find it yourself, use a finder, or ask a tool that does discovery.
Use a finder. ZeroBounce's Email Finder uses 20 credits per successful query, according to the page we read on 2026-11-16 [[10]](#sources). Other tools charge differently. lemlist advertises a 650M+ lead database with an email and phone finder, and says credits are charged only for successful results (checked 2026-11-06) [[11]](#sources). Causo counts one token per decision maker with a verified email, and top-ups cost $0.30 a token on its Founder's Delight and Serious Business plans (checked 2026-11-09) [[12]](#sources). Compare what each one counts as a success before you compare prices.
Use Outlevo. Contact discovery costs 4 credits, and volume contact discovery costs 2 credits [[1]](#sources). The Builder plan is USD 29 a month with 320 credits, and Growth is USD 149 a month with 3000 credits [[1]](#sources). For the other plans and the full credit table, see Outlevo pricing.
Do it yourself. If you reach an address by hand, whether from a public page or from a reply you received, record where it came from. An address with no source goes into the same bucket as a guess: hypothesis, to be verified before use.
Whichever route you choose, a found address is not yet a checked address.
7. Verify before you send
Run every address through a verifier. For background, see the glossary entry on deliverability.
Prices differ by provider. Prices from outside Outlevo carry the date they were checked:
- Outlevo: email verification costs 1 credit [[1]](#sources).
- ZeroBounce: one credit per email address verified, in bulk or through the real-time API (checked 2026-11-16) [[13]](#sources). Its Freemium plan is $0 a month with 100 validation credits monthly (checked 2026-11-09) [[14]](#sources).
- Kickbox: 500 verifications for $5 and 1,000 for $10 (checked 2026-11-04) [[15]](#sources) [[16]](#sources).
- Bouncer: 1,000 credits for $8, as a minimum purchase (checked 2026-11-16) [[17]](#sources).
ZeroBounce says it validates catch-all emails and addresses behind secure email gateways, in bulk or in real time (checked 2026-11-16) [[18]](#sources). Read what any verifier you pick says about those cases. For a side-by-side view, see email verification tools: pricing compared and the Bouncer page.
If a verifier returns an unclear result, do not send to that address in your first batch. Keep it in the sheet marked unverified and try a different route to the same person.
What to check
Run this list on each row before it goes into a campaign.
The person.
- The name and the role are quoted from a page, with the page address and the date you read it.
- At least a second place agrees. If you follow Outlevo's rule, you have at least three observations with a source and a date each [[3]](#sources).
- Anything you could not confirm is marked as a hypothesis.
The address.
- You know where it came from.
- It has been verified, and the result and date are in the row.
- It does not match a record in your CRM or suppression list marked as opted out.
The sender.
- Every mailbox is connected and warmed up. In Smartlead's flow with Outlevo, each mailbox must be warmed up and its domain must have SPF, DKIM and DMARC checked in the last 7 days before a campaign sends [[19]](#sources). For what DMARC is, see the glossary entry on DMARC.
- If you use Outlevo's managed mailboxes, a new mailbox sends nothing until it is warm: at least 14 days, usually about 3 weeks [[20]](#sources).
The expectation.
- Smartlead's State of Cold Email 2026 puts the median cold email reply rate at 0.74% per contact, with the top quarter at 1.43% (checked 2026-11-12) [[21]](#sources). Most contacts will not reply. Check the name and the address before you send, not after.
Rules for emailing
Rules depend on where the recipient is and on how the firm is organized. These are the ones the sources state. Check which apply to the markets you sell into. This guide does not pick markets for you, and none of this replaces advice from your own counsel.
- Postal address. The CAN-SPAM guide for business says: "Your message must include your valid physical postal address." [[2]](#sources)
- Unsubscribe. Google's sender guidelines say: "Marketing messages and subscribed messages must support one-click unsubscribe, and include a clearly visible unsubscribe link in the message body." [[22]](#sources) RFC 8058 "describes a method for signaling a one-click function for the List-Unsubscribe email header field." [[23]](#sources)
- UK corporate recipients. The ICO says: "You can email or text any corporate body (a company, Scottish partnership, limited liability partnership or government body)." [[24]](#sources) The listed categories are a company, a Scottish partnership, a limited liability partnership and a government body, so check which of these the firm is.
- EU legal basis. GDPR Article 6(1)(f) allows processing "necessary for the purposes of the legitimate interests pursued by the controller or by a third party" [[25]](#sources). Recital 47 says "The processing of personal data for direct marketing purposes may be regarded as carried out for a legitimate interest." [[26]](#sources) The word "may" matters. It does not say every message qualifies.
Keep a record of your reason for contacting each person. It is the same record as your sourced note from steps 4 and 5.
If you use Outlevo to send
Some controls apply whichever route you took to the address.
- Nothing is sent outside a policy that a person approved. Policies set who can be contacted, on which channels, how often and with what budget [[27]](#sources).
- Every external action is checked against the approved policy before it runs, and recorded in a ledger. Kill switches pause a campaign, a channel or the whole workspace at once [[27]](#sources).
- Email addresses are encrypted at the field level [[28]](#sources).
- If you work in Gmail, a recipient guard warns before you email a contact Outlevo should not reach [[29]](#sources).
Details are on How Outlevo works and the security page.
Next step
Pick five law firms you believe fit. For each, write the role you are looking for, then fill in one sourced row: name, role in the page's own words, two places that agree, the address, the verification result and the date.
If you want to define your target firms first, run the free ICP assessment. If you want to compare verifiers before you pay, start with email verification tools: pricing compared. For deliverability tools, see email deliverability tools.
Send only after each row passes the checks above. Then read the opt-out and suppression guide so that the first reply asking you to stop is handled the same day.
Sources
- Outlevo pricing
- FTC: CAN-SPAM Act compliance guide for business
- Readiness Cards
- Free ICP assessment
- Release 2026-10-19
- ICP from evidence
- Release 2026-10-19
- HubSpot integration
- CSV and Excel integration
- ZeroBounce: pricing
- lemlist pricing
- Causo pricing
- ZeroBounce: pricing
- ZeroBounce: pricing
- Kickbox: pricing
- Kickbox: pricing
- Bouncer: pricing
- ZeroBounce: feature
- Smartlead integration
- Managed mailboxes integration
- Smartlead, The State of Cold Email 2026: reply rate per contact (top quartile; January to June 2026, more than 850 million emails)
- Google: Email sender guidelines
- RFC 8058: Signaling One-Click Functionality for List Email Headers
- ICO: Electronic mail marketing (PECR)
- GDPR Article 6(1)(f): lawfulness of processing
- GDPR Recital 47: legitimate interests of the controller
- How Outlevo works
- Security
- Gmail extension integration