Short answer: Pick the role you want to reach, find a named person with that role on the company's public pages, then verify the address before you send. In Outlevo, contact discovery costs 4 credits and email verification costs 1 credit [[1]](#sources). Every message must also include your valid physical postal address [[2]](#sources).
Who this is for
This guide is for a founder, a salesperson or a marketer who sells to healthcare organizations and needs one named person per account, not a purchased list. It assumes you can already say what you sell and to what kind of company.
It does not tell you which job title decides at a healthcare company. That depends on what you sell and on how each organization buys, so this guide shows you how to get the title from your own evidence instead of a guess. It also does not cover healthcare-specific legal rules. If you handle patient information or sell into regulated settings, ask your own counsel about those rules before you send anything.
You will get the most from it if you want a repeatable routine. The routine has five parts: decide the role, collect evidence, get the address, verify it, and send within the rules.
Steps
1. Decide the role from your own deals
Start with the title you want to reach. Do not start with a company name.
If you have closed deals, use them. Outlevo can import won and lost deals from a CSV of up to 200,000 rows [[3]](#sources). It can also read companies and deals from HubSpot [[4]](#sources). If you connect HubSpot and an admin turns on contact import with a stated purpose, it reads email, name, job title and email opt-out [[4]](#sources). That gives you the job titles of the contacts in your CRM.
Be honest about sample size. Outlevo's win/loss analysis counts companies, not deals, and treats under 10 won companies as very low confidence [[5]](#sources). If you have fewer than 10 wins, treat your target role as a hypothesis. Test it on a small batch before you build a large list around it.
Write the role down in one line, for example "the person who signs off on this purchase, by title". Then write a second line for the fallback title you will accept if the first is not listed. Without those two lines, every account becomes a fresh debate.
You also need to decide which markets you sell into. Outlevo asks customers which countries they sell into and never proposes markets [[5]](#sources). Make that choice yourself before you build the list.
2. Collect public evidence for each company
A name is only useful if you can say where you saw it. For each account, open the company's own public pages first. Look for a page that lists people and titles, then look for other places where a person is named in connection with the role. Record four things for each person:
- the name
- the title as printed
- the page address
- the date you read it
Outlevo's own method is a useful model. A Readiness Card needs at least three observations, each with a source and a date [[6]](#sources). Facts read from a website are kept only when their quote is found on the page [[6]](#sources). Guesses are labelled as hypotheses, never presented as findings [[6]](#sources). You can copy that discipline in a spreadsheet. If you cannot point to a page, the name is a hypothesis, and you should mark it that way.
If you want a quick read of your own site before you work on targets, the free assessment reads up to 5 public pages of a website [[7]](#sources). It returns facts labelled as verified observations or AI inferences, and up to 5 experimental segment hypotheses [[7]](#sources). It reads your site, so use it to sharpen your description of who you sell to. It does not name people at the companies you want to reach.
A note on website-visitor tools. Outlevo's website-visitor feature shows which companies visit and which pages they read, and it never identifies a person [[8]](#sources). It can tell you an account is interested. It cannot give you a named contact or an address.
3. Get the address
Once you have a named person with a sourced title, you need the address. You have a few routes, and each one has a different cost.
Inside Outlevo. Contact discovery costs 4 credits, and volume contact discovery costs 2 credits [[1]](#sources). Verifying an address costs 1 credit [[1]](#sources). Builder is USD 29 per month with 320 credits, and Growth is USD 149 per month with 3000 credits [[1]](#sources).
Here is what that means in contacts. At 4 credits for discovery plus 1 for verification, that is 5 credits per contact. 320 credits covers 64 contacts and 3000 credits covers 600. At the volume rate, 2 plus 1 is 3 credits per contact. That covers 106 whole contacts on Builder and 1,000 on Growth. These numbers assume you spend every credit on discovery and verification. Qualification, research and other metered actions draw from the same credits [[1]](#sources).
A dedicated finder. ZeroBounce's Email Finder uses 20 credits per successful query, as quoted on its pricing page and read on 2026-11-16 [[9]](#sources). lemlist says it charges credits only for successful results on its email and phone finder, per its pricing page checked on 2026-11-06 [[10]](#sources). In both cases, compare what a successful result costs, not the headline plan price.
Your own records. If a person has already written to you, or your CRM already holds their address, use that before you pay for anything. Check it against the opt-out rules in step 5 first.
Whichever route you use, keep the source of the address next to the address. That way you can say where you got it if a recipient or a colleague asks.
4. Verify before you send
A found address is a candidate. Verify it.
Prices for verification are public, and they vary:
- ZeroBounce charges one credit per email address verified, whether you use bulk validation or the real-time API, as quoted on 2026-11-16 [[11]](#sources). Its Freemium plan is $0 a month with 100 validation credits monthly, and Pay as You Go starts at $39 for 2,000 validations, both read on 2026-11-09 [[12]](#sources) [[13]](#sources).
- Kickbox charges $10 for 1,000 verifications and $70 for 10,000, read on 2026-11-04 [[14]](#sources) [[15]](#sources).
- Bouncer charges $8 for 1,000 credits and $60 for 10,000, read on 2026-11-16 [[16]](#sources) [[17]](#sources).
ZeroBounce says it validates catch-all emails and addresses behind secure email gateways, as quoted on 2026-11-16 [[18]](#sources). Ask any verifier how it treats those results before you trust a "valid" label.
For a side-by-side view, see email verification tools: pricing compared and Bouncer pricing, plans and alternatives.
Treat the result as a filter, not a verdict on the person. Drop addresses that fail. Hold the uncertain ones back and decide on them in a separate pass.
5. Send inside the rules
Finding the right person does not help if the message breaks a rule. Four sources set the floor.
- CAN-SPAM. The FTC's compliance guide says: "Your message must include your valid physical postal address." [[2]](#sources) (checked 2026-10-22)
- Google. Its sender guidelines say: "Marketing messages and subscribed messages must support one-click unsubscribe, and include a clearly visible unsubscribe link in the message body." [[19]](#sources) (checked 2026-10-22) The method behind one-click is described in RFC 8058: "This document describes a method for signaling a one-click function for the List-Unsubscribe email header field." [[20]](#sources) (checked 2026-10-22)
- Yahoo. Its sender best practices say: "Honor unsubscribes within 2 days" [[21]](#sources) (checked 2026-10-22)
- GDPR. Article 6(1)(f) allows processing where "processing is necessary for the purposes of the legitimate interests pursued by the controller or by a third party" [[22]](#sources). Recital 47 says: "The processing of personal data for direct marketing purposes may be regarded as carried out for a legitimate interest." [[23]](#sources) (both checked 2026-10-22) Whether that basis fits your case is a decision for you and your counsel.
Build the unsubscribe path before the first send. Keep one suppression list for every address that opted out, and check each new batch against it. The guide on cold email opt-outs and suppression lists covers that in detail.
6. Make sure the mailbox is ready
Verification covers the address, not the sender. If you send through Outlevo with Smartlead, every mailbox must be connected and warmed up before a campaign sends [[24]](#sources). Its domain must also have SPF, DKIM and DMARC checked in the last 7 days [[24]](#sources). A new managed mailbox sends nothing until it is warm: at least 14 days, usually about 3 weeks [[25]](#sources). Plan your list-building around that wait. Build the list while the mailboxes warm.
For background, see the glossary entries on deliverability and DMARC. To compare tools for this part of the work, see email deliverability tools: pricing compared.
7. Keep the record
Store each contact with its title, its evidence and the date. In Outlevo, personal data such as email addresses is encrypted at the field level [[26]](#sources). If you keep your own spreadsheet, apply the same care to who can open it.
If you use HubSpot, Outlevo writes only to its own properties and never edits your standard fields. Nothing is written until an owner or admin approves the field mapping [[4]](#sources). With Salesforce, the connection is a pilot that needs the Outlevo package in your org [[27]](#sources). Connecting and syncing a CRM uses no credits in either case [[4]](#sources) [[27]](#sources).
What to check
Run through this list before a batch goes out.
The person
- The title on your sheet matches the role you wrote down in step 1, or your named fallback.
- You can point to a page and a date for the name and the title.
- Anything you could not source is labelled as a guess, not a finding.
The address
- It has been through a verifier, and you know how that verifier treats catch-all results.
- You know which route produced it, and what that route cost per successful result.
- It is not on your suppression list.
The message
- It carries your valid physical postal address [[2]](#sources).
- It has a visible unsubscribe link in the body and supports one-click unsubscribe [[19]](#sources).
- You have a process to honor opt-outs within 2 days [[21]](#sources).
The sender
- Each mailbox is connected and warmed up, and SPF, DKIM and DMARC were checked in the last 7 days if you send through Smartlead [[24]](#sources).
- You started with a small batch rather than the whole list.
Your expectations
- Smartlead's State of Cold Email 2026, covering more than 850 million emails sent from January to June 2026, puts the median cold email reply rate at 0.74% per contact and the top quarter of senders at 1.43% [[28]](#sources) (checked 2026-11-12). At the median, 1,000 contacts would produce about 7 replies. That benchmark is typical of cold email in general and not specific to healthcare, so use it as a planning reference and measure your own rate.
A small, well-sourced list with a verified address for each person is easier to defend than a large list with unclear origins. It is also easier to fix when a batch underperforms, because you know where each name came from.
Next step
Do three things this week.
- Write your role line and fallback title, using your own won deals if you have them. If you have fewer than 10 won companies, call the role a hypothesis [[5]](#sources).
- Pick 20 accounts and fill in the four evidence fields for each person: name, title, page, date. Drop any person you cannot source.
- Verify the addresses, send a small first batch and read the bounces and replies before you scale.
If you want Outlevo to read your own site and propose segments to test, run the free ICP assessment [[7]](#sources). For the buyer side of this market, read Outbound to healthcare technology buyers. Credit costs and plans are on the pricing page.
Sources
- Outlevo pricing
- FTC: CAN-SPAM Act compliance guide for business
- CSV and Excel integration
- HubSpot integration
- ICP from evidence
- Readiness Cards
- Free ICP assessment
- Website visitors integration
- ZeroBounce: pricing
- lemlist pricing
- ZeroBounce: pricing
- ZeroBounce: pricing
- ZeroBounce: pricing
- Kickbox: pricing
- Kickbox: pricing
- Bouncer: pricing
- Bouncer: pricing
- ZeroBounce: feature
- Google: Email sender guidelines
- RFC 8058: Signaling One-Click Functionality for List Email Headers
- Yahoo: Sender best practices
- GDPR Article 6(1)(f): lawfulness of processing
- GDPR Recital 47: legitimate interests of the controller
- Smartlead integration
- Managed mailboxes integration
- Security
- Salesforce integration
- Smartlead, The State of Cold Email 2026: reply rate per contact (top quartile; January to June 2026, more than 850 million emails)